24" Powder Coated Shower Stall

24" Powder Coated Shower Stall - Boho Camper Vans | Camper Vans for Sale or Rent in Arizona
24" Powder Coated Shower Stall - Boho Camper Vans | Camper Vans for Sale or Rent in Arizona
24" Powder Coated Shower Stall - Boho Camper Vans | Camper Vans for Sale or Rent in Arizona
24" Powder Coated Shower Stall - Boho Camper Vans | Camper Vans for Sale or Rent in Arizona
24" Powder Coated Shower Stall - Boho Camper Vans | Camper Vans for Sale or Rent in Arizona
24" Powder Coated Shower Stall - Boho Camper Vans | Camper Vans for Sale or Rent in Arizona

24" Powder Coated Shower Stall

$2,399.00

Current lead time is 4-6 weeks

Powder coated aluminum shower stalls offer a ready to install solution to keep you clean while on the road in all weather conditions and locations.

Dimensions

24"w x 74.5"h x 24"d

Materials

Shower is an all powder coated aluminum material, including the pan, which will be matched in color.

  • Ships knocked down and requires assembly

  • Ventilation holes above door

  • Holes for assembly are pre drilled for rivets provided

  • Customer responsible for plumbing, including adding a drain (not included)

  • Shower seams should be siliconed after installation to create a water tight seal

  • Pan is not sloped, as drain locations will vary by customer and vans sit at different angles depending on parking

  • Shower curtain on interior of unit is required and needs to be purchased separately (we suggest hanging with a small tension rod from Amazon/Walmart/etc)

  • We recommend use of a teak shower mat for comfort

  • All showers are 24" deep and 74.5" high. Widths are 24", 30", 33", or 36".

  • Door is 20.6”wide to open an appropriate distance into the van.

  • We suggest cleaning with a mild detergent such as Dawn or Simple Green cleaners. Please use a cloth, sponge, or soft bristled brush, but not abrasive scrubbers or harsh chemicals to avoid damaging the powder coat.

To assemble:

  • After identifying a location for your pan and drain, place rear panel behind the pan and attach side panels using rivets.

  • Attach front door panel using rivets or bolts.

  • Insert ceiling panel last (any electrical for lighting can be done prior to this step) and rivet or bolt in place.

  • We recommend fastening to the van using the floor drain and fasteners of your choice through the top of the shower into the van’s framing members.

  • Additional rivet holes can be drilled if needed, however are not required

  • Silicone seams to create a water tight unit

This product will ship via freight carrier on a pallet. We strongly recommend choosing a shipping address that can accommodate a truck. Please review our freight policies and inspect your shower upon receipt for freight damage. All freight damage or other shipping issues must be reported in a timely manner according to our freight policy.

Color:
Quantity:
Add To Cart